| |
If you have got a 3D printer with at least 20 x 20 x 18 cm building
volume and you aren't skilled to make cutting works, instead to
loose a lot of time trying to hand build the model, you may purchase
this file .stl ready for 3D printing and let your printer makes the
hard work in place of you.
Following images show the shape of the model of Eldar Webway Base that
your 3D printer will make for your w40K terrain, it is 17 cm tall.
After print, no glueing phase is required, the model will result complete,
you only need to paint it with colors that you prefer.
This model is suitable for wargames of 28/35 mm sized miniatures.
For best results use good PLA filaments and set the printing data
to the following values: layer height = 0.10 mm; outline
perimeter shells = 2; infill density = 20%; print speed = 30/60
mm/s; bottom-top thickness = 0,8 mm.
|
|
| |
The most difficulty in order to realize a good model for 3D printing,
is to draw accurate plans to convert in perfect mesh files. The project
phase may require many hours/days of work.
These files are given to purchaser only in order to build one or
more models suitable for own wargame terrain, author keeps all rights
on commercial use of the model and files which cannot be resold or refurbished
in any form, except with the prior written permission of the author.
These files contain perfect 3D mesh but, due to the wide variety
of 3D printers and respective settings, no warranty is released about
the quality of the printed models.
If you have any question, or for informations about your purchase,
please write to Castiglioni
A. , you will get answer in 24 hours.
|
|
