If you have got a 3D printer with at least 13 x 13 cm building
area and you aren't skilled to make cutting works, instead to loose
a lot of time trying to build the model, you may purchase these files
.stl ready for 3D printing and let your printer makes the hard work
in place of you.
Following images show the shape of the model of tower that your 3D printer
will make for your medieval terrain: the complete design, all single
floors designs contained in the STL files and pictures of unpainted
After print, no glueing phase is required, the model will result complete
because the upper floors may be putted and removed in course of wargames,
to permit you to put figures inside of them, you only need to paint
tower with colors that you prefer.
For best results use good PLA filaments and set the printing data
to the following values: layer height = 0.10 mm; outline
perimeter shells = 2;
Infill density = 20%; print speed = 20/60 mm/s; bottom-top
thickness = 0,8 mm. No support material is required.
The most difficulty in order to realize a good model for 3D printing,
is to draw accurate plans to convert in perfect mesh files. The project
phase may require many hours/days of work.
These files are given to purchaser only in order to build one or
more models suitable for own wargame terrain, author keeps all rights
on commercial use of the model, design and files which cannot be resold
or refurbished in any form, except with the prior written permission
of the author.
These files contain perfect 3D mesh but, due to the wide variety
of 3D printers and respective settings, no warranty is released about
the quality of the printed models.
If you have any question, or for informations about your purchase,
please write to Castiglioni
A. , you will get answer in 24 hours.