|
If you have got a 3D printer with at least 15 x 15 cm building
area and you aren't skilled to make cutting works, instead to loose
a lot of time trying to build the model, you may purchase these files
.stl ready for 3D printing and let your printer makes the hard work
in place of you.
Following images show the shape of the medieval outpost that your 3D
printer will make for your wargame terrain: the complete design, all
single floors designs contained in the STL files and pictures of an
unpainted printed medieval outpost.
After print, no glueing phase is required, the model will result complete
because the upper floors may be putted and removed in course of wargames,
to permit you to put figures inside of them, you only need to paint
the medieval outpost with colors that you prefer.
For best results use good filaments and set the printing data to
the following values: layer height = 0.10 mm; outline perimeter
shells = 2; Infill density = 20%; print speed = 20/60 mm/s; bottom-top
thickness = 0,8 mm. No support material is required.
|
|
|
The most difficulty in order to realize a good model for 3D printing,
is to draw accurate plans to convert in perfect mesh files. The project
phase may require many days of work.
These files are given to purchaser only in order to build one or
more medieval outposts suitable for own wargame terrain, author keeps
all rights on commercial use of the model, design and files which cannot
be resold or refurbished in any form, except with the prior written
permission of the author.
These files contain perfect 3D mesh but, due to the wide variety
of 3D printers and respective settings, no warranty is released about
the quality of the printed models.
If you have any question, or for informations about your purchase,
please write to Castiglioni
A. , you will get answer in 24 hours.
|
|